Products

Datalogger 325

The product series D-CMS® 325 is perfectly designed for data acquisition in vehicles. Operating temperatures from -30 °C to +80 °C and vibration up to 5g pose no problem for DALOG®. It is available with different enclosures, connectors and electrical protection classes, such as IP65 or IP68. If you need information about the current position of their vehicle, a GPS module can be connected.

The data recorder cannot only be used as an individual, stand-alone unit, but also to complete the high-end D-CMS 650 in a master-slave network.

D-CMS® distinguishes itself from others by sophisticated memory management and ease of use.

Remote access for reading data or changing configuration is possible via VPN, radio, or modem.

Data Sheet DALOG® D-CMS® 325
Analog Inputs 8 channels/14Bit
Voltage / current input ± 10V, (0 .. 20) mA
Digital Inputs 8 channels
Frequency Inputs 2 channels
Digital Outputs 8 channels
Analog outputs 8 channels
Sampling rate > 200kHz
Real Time Clock Yes
Memory capacity 4GByte RAM
Serial interface 1 x RS 232
Ethernet port 1 x Ethernet (TCP/00IP)
Operating temperature (-30...80)°C
Vibration resistance (100...1000)Hz<5g
Protection IP65
Dimensions 160 x 120 x 60 mm
Housing Aluminium casing
Optional:  
  Display
  LED warning light
  16 analog inputs
  2 x RS 232, 2 x CAN
  IP 65
  Housing / terminals - on request